Indoor Air Quality Services, Georgetown TX
Assessment & Purification Systems
Evaluate your home's air quality, identify HVAC-related IAQ problems, and recommend targeted solutions.
Install whole-home air purification systems integrated with your HVAC for whole-house air treatment.
Install UV germicidal lights in the air handler to kill bacteria, mold, and viruses on the evaporator coil and in airflow.
Install bipolar ionization or oxidizing purifiers for active air treatment throughout the duct system.
Install HEPA media filter cabinets for hospital-grade filtration, critical for allergy sufferers during Georgetown cedar season.
Retrofit existing air handlers to accept 4-5 inch media filters for dramatically improved filtration over standard 1-inch filters.
Repair or service electronic air cleaners, clean collection cells, test ionizer wires, and verify performance.
Upgrade from standard filter slots to high-performance filtration, more effective and often more convenient.
Humidity Control
Install a dedicated whole-house dehumidifier for Georgetown's humid summers, standalone or integrated with HVAC.
Install bypass, fan-powered, or steam humidifiers for Georgetown's dry winter months.
Replace evaporator pads in bypass and fan-powered humidifiers, annual replacement required for proper performance.
Clean steam canisters, replace electrodes, and service steam humidifiers for reliable winter operation.
Install bypass humidifiers connected to the supply and return plenums for whole-home humidification.
Diagnose and correct humidity problems, too high in summer, too low in winter, through equipment and system adjustments.
Address uneven humidity between floors and zones through system tuning and supplemental equipment.
Comprehensive service to stabilize temperature and humidity for consistent year-round comfort.
Odor, Mold & Biological Treatment
Identify and eliminate HVAC-related odors, musty smells, burning odors, and chemical odors with specific mechanical causes.
Install algaecide tablet dispensers in drain pans to prevent biological growth, particularly effective in Georgetown's heat.
Treat dirty sock syndrome, musty odor when the system starts, caused by microbial growth on evaporator coils.
Identify and treat mold growth in HVAC ductwork and air handlers, address the moisture source causing growth.
Georgetown IAQ, What's Different Here
Georgetown has three distinct IAQ seasons: cedar fever season (December-March) with massive pollen loads that clog filters and enter homes; summer humidity season (May-September) where AC systems that over-cool can create condensation and mold conditions; and the shoulder seasons where doors and windows open and outdoor allergens enter. HEPA filtration during cedar season and proper dehumidification in summer address the most impactful IAQ problems for most Georgetown families.
How a Bypass Humidifier Actually Humidifies
A bypass humidifier doesn't have its own fan or blower, which surprises a lot of homeowners once they understand how it works. It relies entirely on the pressure difference your furnace or air handler's blower already creates between the supply plenum and the return plenum. We install a bypass duct connecting the two, with a humidifier cabinet mounted in that connection housing a wetted evaporator pad. When the blower runs, that pressure differential pulls a portion of warm supply air backward through the bypass duct and across the wet pad, where it picks up moisture through evaporation before rejoining the return airstream.
Getting that pressure differential right is the main technical challenge in installation. Too little pressure difference and not enough air moves across the pad to humidify effectively. Too much, and you can pull more air through the bypass than intended, which throws off the system's overall air balance. We measure static pressure at the supply and return plenums before cutting into ductwork, and size the bypass duct diameter and damper opening to the specific system rather than using a single standard size for every install.
The water side of the installation involves tapping a nearby cold water line with a saddle valve, running a small diameter line to the humidifier's water inlet, and installing a drain line to carry away the water that passes through the pad without evaporating, which is a normal and necessary part of how these units work. A humidistat, either a standalone wall control or one wired into the furnace control board, opens the water valve and bypass damper only when there's an active call for heat, since a bypass humidifier can only add moisture while the blower is moving air across the pad.
Georgetown winters are dry rather than cold by most standards, but heating already-low humidity outdoor air makes indoor relative humidity drop further, sometimes into the teens, which is dry enough to cause static shocks, cracked woodwork, and irritated sinuses. A properly sized and installed bypass humidifier brings that back toward a comfortable 35 to 45 percent range during the heating season. The tradeoff for the lower upfront cost compared to fan-powered or steam units is that output is capped by how much air the furnace blower moves across the pad, so very large or unusually tight homes sometimes need a higher-output alternative instead.
Bypass Humidifier Installation Questions
Improve Your Georgetown Home's Air Quality
Allergies, musty odors, or humidity problems, we find and fix the mechanical cause.