๐Ÿ“ Serving Georgetown, TX & Williamson County Mon-Sat 7AM-8PM ยท Sun 9AM-5PM | (512) 798-8094 | โšก Same-Day Service Available
Technicians Available in Georgetown
Same-Day Slots Open
Dispatch: Georgetown TX, not Austin
Average response: 45-90 min
๐ŸŒฟ Georgetown TX ยท Same-Day Available

๐ŸŒฟ Electronic Air Cleaner Repair, Georgetown TX

Georgetown's combination of cedar season, high summer humidity, and tight modern construction creates real IAQ challenges. Poor air quality in HVAC systems shows up as allergy symptoms, musty odors, mold growth in vents, and humidity that won't stabilize. ProAir Georgetown's IAQ services address the mechanical root causes, not just air fresheners.

๐Ÿ“ž Call (512) 798-8094 Schedule Online
๐Ÿ›ก๏ธTX HVAC Licensed (TDLR)
๐Ÿ›ก๏ธTX Licensed & NATE Certified
โšกSame-Day Dispatch
Same Day
Service Available
1-Year
Parts & Labor Warranty
1-Yr
Parts & Labor Warranty
TX Licensed
TDLR Regulated

Indoor Air Quality Services, Georgetown TX

Assessment & Purification Systems

๐Ÿ”
Indoor Air Quality Assessment

Evaluate your home's air quality, identify HVAC-related IAQ problems, and recommend targeted solutions.

๐ŸŒฟ
Air Purification System Installation

Install whole-home air purification systems integrated with your HVAC for whole-house air treatment.

โ˜€๏ธ
In-Duct UV Light Installation

Install UV germicidal lights in the air handler to kill bacteria, mold, and viruses on the evaporator coil and in airflow.

โšก
Oxidizing Air Purifier Integration

Install bipolar ionization or oxidizing purifiers for active air treatment throughout the duct system.

๐Ÿ”ฒ
HEPA Filter Cabinet Installation

Install HEPA media filter cabinets for hospital-grade filtration, critical for allergy sufferers during Georgetown cedar season.

๐Ÿ”ง
Media Filter Rack Retrofitting

Retrofit existing air handlers to accept 4-5 inch media filters for dramatically improved filtration over standard 1-inch filters.

๐Ÿ”Œ
Electronic Air Cleaner Repair

Repair or service electronic air cleaners, clean collection cells, test ionizer wires, and verify performance.

๐Ÿšซ
Air Filtration System Upgrade

Upgrade from standard filter slots to high-performance filtration, more effective and often more convenient.

Humidity Control

๐Ÿ’ง
Whole-House Dehumidifier Installation

Install a dedicated whole-house dehumidifier for Georgetown's humid summers, standalone or integrated with HVAC.

๐Ÿ’ฆ
Whole-House Humidifier Installation

Install bypass, fan-powered, or steam humidifiers for Georgetown's dry winter months.

๐Ÿ”„
Humidifier Pad Replacement

Replace evaporator pads in bypass and fan-powered humidifiers, annual replacement required for proper performance.

โ™จ๏ธ
Steam Humidifier Maintenance

Clean steam canisters, replace electrodes, and service steam humidifiers for reliable winter operation.

๐Ÿ”Œ
Bypass Humidifier Installation

Install bypass humidifiers connected to the supply and return plenums for whole-home humidification.

โš–๏ธ
Indoor Humidity Control

Diagnose and correct humidity problems, too high in summer, too low in winter, through equipment and system adjustments.

๐Ÿ—บ๏ธ
Humidity Distribution Control

Address uneven humidity between floors and zones through system tuning and supplemental equipment.

๐ŸŒก๏ธ
Indoor Climate Stabilization

Comprehensive service to stabilize temperature and humidity for consistent year-round comfort.

Odor, Mold & Biological Treatment

๐Ÿšซ
HVAC Odor Removal

Identify and eliminate HVAC-related odors, musty smells, burning odors, and chemical odors with specific mechanical causes.

๐Ÿงช
Algae Tablet Treatment Programs

Install algaecide tablet dispensers in drain pans to prevent biological growth, particularly effective in Georgetown's heat.

๐Ÿงน
Dirty Sock Syndrome Treatment

Treat dirty sock syndrome, musty odor when the system starts, caused by microbial growth on evaporator coils.

๐Ÿ„
Mold in Vents Treatment

Identify and treat mold growth in HVAC ductwork and air handlers, address the moisture source causing growth.

Georgetown IAQ, What's Different Here

๐ŸŒฟ Local IAQ Context

Georgetown has three distinct IAQ seasons: cedar fever season (December-March) with massive pollen loads that clog filters and enter homes; summer humidity season (May-September) where AC systems that over-cool can create condensation and mold conditions; and the shoulder seasons where doors and windows open and outdoor allergens enter. HEPA filtration during cedar season and proper dehumidification in summer address the most impactful IAQ problems for most Georgetown families.

Diagnosing an Electronic Air Cleaner That's Not Cleaning

Electronic air cleaners work differently from any media filter, which is exactly why they fail differently too. Air passes first through a pre-filter that catches large debris, then through a set of charged ionizing wires that give incoming particles an electrical charge, and finally through a collector cell made of alternating charged and grounded metal plates that attract those charged particles the way a magnet attracts metal filings. When every stage is working, this design captures particles far smaller than a standard filter can, without adding meaningful airflow resistance. When one stage fails, the whole system's effectiveness drops even though the unit keeps running and the fan keeps moving air normally.

The most common failure by far is simply a dirty collector cell. Unlike a disposable filter, the cell relies on clean, unobstructed metal surfaces to hold an electrical charge and attract particles, and a cell that's gone six months or a year without cleaning gets coated in enough captured debris that it can no longer hold charge effectively, essentially becoming inert while still physically sitting in the airstream. Most cells are designed to be removed and either hand washed or run through a dishwasher on a rinse cycle, and we walk homeowners through that process during service since it's something they can do themselves between professional visits.

Ionizer wire problems are the second most common issue, and they're usually noticeable before we even open the cabinet. A wire with buildup or physical damage will arc intermittently against the grounded frame, producing an audible ticking or snapping sound and sometimes a faint ozone smell. We test the high-voltage output at the power supply to confirm it's within the manufacturer's specified range, inspect each wire for corrosion or breaks, and replace individual wires rather than the whole ionizer assembly when only one or two are compromised.

The power supply and transformer are the least common failure point but the most disruptive, since a failed power supply means no charging happens at all regardless of how clean the cells are. We test voltage output directly rather than assuming a working indicator light means the electrical stage is functioning correctly, since some units keep an unrelated status light on even when the actual charging circuit has failed. Any repair on these units also includes verifying ozone output stays within safe limits, since a malfunctioning ionizer stage can produce more ozone than a properly functioning one.

Electronic Air Cleaner Repair, Frequently Asked

Why does my electronic air cleaner seem less effective than when it was new? +
The most common cause is a dirty collector cell. These cells need periodic cleaning, typically every one to three months, to hold an electrical charge effectively. A cell coated in accumulated debris can barely attract particles even though the unit is still running.
Can I clean the collector cells myself? +
Yes, most cells are designed to be removable and either hand washed or run through a dishwasher rinse cycle. We show homeowners the process during service so it can be done between professional visits.
What causes a ticking or snapping sound from the unit? +
That's usually an ionizer wire arcing against the grounded frame, caused by buildup or physical wire damage. It often comes with a faint ozone smell and should be addressed since a damaged wire won't charge particles effectively and can increase ozone output.
Is it normal to smell a slight odor near the unit? +
A very faint odor can be normal ozone byproduct from ionization, but a strong or increasing smell usually indicates a wire or power supply problem. We test ozone output during repair to confirm it stays within safe limits.
How do I know if the power supply has failed? +
The clearest sign is particles no longer being attracted to the collector cells even after cleaning, since the ionizing stage isn't charging them. We test voltage output directly rather than relying on indicator lights, since some units keep a status light on even after the charging circuit fails.

Improve Your Georgetown Home's Air Quality

Allergies, musty odors, or humidity problems, we find and fix the mechanical cause.

๐Ÿ“ž Call Now
(512) 798-8094