Indoor Air Quality Services, Georgetown TX
Assessment & Purification Systems
Evaluate your home's air quality, identify HVAC-related IAQ problems, and recommend targeted solutions.
Install whole-home air purification systems integrated with your HVAC for whole-house air treatment.
Install UV germicidal lights in the air handler to kill bacteria, mold, and viruses on the evaporator coil and in airflow.
Install bipolar ionization or oxidizing purifiers for active air treatment throughout the duct system.
Install HEPA media filter cabinets for hospital-grade filtration, critical for allergy sufferers during Georgetown cedar season.
Retrofit existing air handlers to accept 4-5 inch media filters for dramatically improved filtration over standard 1-inch filters.
Repair or service electronic air cleaners, clean collection cells, test ionizer wires, and verify performance.
Upgrade from standard filter slots to high-performance filtration, more effective and often more convenient.
Humidity Control
Install a dedicated whole-house dehumidifier for Georgetown's humid summers, standalone or integrated with HVAC.
Install bypass, fan-powered, or steam humidifiers for Georgetown's dry winter months.
Replace evaporator pads in bypass and fan-powered humidifiers, annual replacement required for proper performance.
Clean steam canisters, replace electrodes, and service steam humidifiers for reliable winter operation.
Install bypass humidifiers connected to the supply and return plenums for whole-home humidification.
Diagnose and correct humidity problems, too high in summer, too low in winter, through equipment and system adjustments.
Address uneven humidity between floors and zones through system tuning and supplemental equipment.
Comprehensive service to stabilize temperature and humidity for consistent year-round comfort.
Odor, Mold & Biological Treatment
Identify and eliminate HVAC-related odors, musty smells, burning odors, and chemical odors with specific mechanical causes.
Install algaecide tablet dispensers in drain pans to prevent biological growth, particularly effective in Georgetown's heat.
Treat dirty sock syndrome, musty odor when the system starts, caused by microbial growth on evaporator coils.
Identify and treat mold growth in HVAC ductwork and air handlers, address the moisture source causing growth.
Georgetown IAQ, What's Different Here
Georgetown has three distinct IAQ seasons: cedar fever season (December-March) with massive pollen loads that clog filters and enter homes; summer humidity season (May-September) where AC systems that over-cool can create condensation and mold conditions; and the shoulder seasons where doors and windows open and outdoor allergens enter. HEPA filtration during cedar season and proper dehumidification in summer address the most impactful IAQ problems for most Georgetown families.
Why That Pad Can't Just Be Rinsed Off
Every bypass and fan-powered humidifier relies on an evaporator pad, a mesh substrate, usually aluminum or a synthetic material, coated in a wicking layer that pulls water across its full surface area so passing air can absorb moisture as it evaporates. That wicking action is what turns a trickle of water into effective humidification, and it depends entirely on the pad's coating and pore structure staying open and absorbent. It's a consumable part by design, meant to be replaced, not cleaned and reused indefinitely.
The reason rinsing doesn't restore a worn pad is mineral scale. Central Texas water, including in Georgetown, carries enough dissolved calcium and magnesium to leave scale deposits behind every time water evaporates off the pad's surface, which happens continuously during the heating season. That scale builds up as a hard mineral crust coating the wicking fibers, and unlike dust or debris, it doesn't rinse away with water because it's chemically bonded to the surface. Over a single heating season, enough scale accumulates to significantly reduce the pad's effective wicking surface, which shows up as noticeably reduced humidification output even though the humidifier itself is running normally.
Left long enough, a heavily scaled pad eventually starts shedding mineral flakes into the airstream or the water reservoir, and the rigid scale coating makes the pad brittle enough to crack or crumble when handled, sometimes leaving fragments in the humidifier cabinet or bypass duct. We replace pads as part of fall maintenance, before the heating season's demand on the humidifier begins, rather than waiting for a homeowner to notice reduced output partway through winter when the house is already uncomfortably dry.
We also inspect the water distribution tray and float valve during pad replacement, since scale buildup isn't limited to the pad itself. A tray with heavy scale can distribute water unevenly across the new pad, undermining the benefit of the replacement, so a full pad service includes clearing tray buildup and confirming the float valve is metering water flow correctly before closing the cabinet back up.
Humidifier Pad Replacement, Common Questions
Improve Your Georgetown Home's Air Quality
Allergies, musty odors, or humidity problems, we find and fix the mechanical cause.